Follow these five steps after the H2 Download Center identifies the correct firmware for your player.
Use only the firmware recommended for your current version. If your H2 is working normally and no update is recommended, you do not need to update it.
Download the compatible firmware
Enter your current firmware version in the H2 Download Center and download the recommended update.
Rename the firmware file
After downloading the file, turn on file name extensions. Then rename the file and enter only update. The final filename should display as update.upt.
Connect H2 to your computer
Keep the SD card inside the H2. Open System Settings, choose USB Mode, select USB—not DAC—and connect the H2 to your computer with the original USB cable.
Copy the file to the H2 SD card
Copy the update.upt file to the root directory of the H2 SD card.
Start the firmware update
When copying is complete, safely eject the H2 and disconnect the cable. Open System Settings, choose Firmware, and select Firmware Update.
Check the firmware version
After the H2 restarts, open System Settings, choose About Player, and confirm the installed firmware version.
Need help?
If you need assistance, contact us before trying another firmware file: sales@hifiwalker.com
